daaarc.blogg.se

Alice gate voip 2 plus wi fi firmware us robotics
Alice gate voip 2 plus wi fi firmware us robotics












How to do this ? Please help.Manuale router alice gate 2 plus wi fi By Ray Grant Follow | Public I want to connect to the NETGEAR wi-fi router of my neighbour and then have internet for my PCs on the 4 lan ports of the 9108. I would like to upload openwrt because I need to use this machine as a WI-FI CLIENT and then as a router between the WI-FI and the Ethernet, simoultaneusly and maybe to run software on it. This procedure works for uploading the US robotics firmware, and it unlocks my router for different uses, purposes and providers other than ALICE.īUT. So flash two times, the first with AGW2-PLUS_psi_clear and the second with the firmware you want to use repeat the procedure short-circuiting the 2 pins marked in red. In some circustamces, before uploading a new firmware it can be useful to erase the flash, upolading this blank fake firmware: AGW2-PLUS_psi_clear You have to adjust your computer lan settings before doing this, in example a static 192.168.1.2 mask 255.255.255.0, because when the router is in this "upload firmware" modality, it doesn't serve any ip address to your PC. If success, the power led becomes red and no other led is active you can remove the short circuit.Īt this point, you connect via ethernet on ETH1, the ip address of the router will be 192.168.1.1, you can connect with your browser at and upload a firmware image. You have to short-circuit the two pins marked red, THEN power on the router if it doesn't work, try fast intermitting the short circuit between the two pins while power on and booting. I installed this image using the procedure described here: … l#msg40859 I can install successfully the US Robotics firmware for Wireless MAXg ADSL Gateway, and I'm almost sure it is the 9108. It is an "Us Robotics Wireless MAXg ADSL Gateway", re-branded by Pirelli Broadband solutions, re-branded by Alice. I have an "Alice Gate 2 PLUS Wi-Fi" (not the business, not voip). Maybe I have not created a proper image, I really don't know. Load average: 1 min:0.13, 5 min:0.09, 15 min:0.03Īfter printing the memory info, a transfer is kindof starting, but it closes immediately, at 0%. Ip_conntrack 29984 3 ipt_NOTRACK,ip_queue,iptable_nat, Live 0xc005f000














Alice gate voip 2 plus wi fi firmware us robotics